Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I did some research on the internet and did not find anyone complaining about this. We are using webex teams, with the recent update to version 3.0.16040 we are experiencing an error with the missing DLL. This issue did not affect the working of th...
We are using ISE 2.1 and I'm experiencing some inconsistencies with reporting. When I ran a report for last 7 days or choose a date range under custom, it would always give me less results and don't cover everything. I ran a specific report for my lo...
Got into a strange situation yesterday. I was trying to lock down an access point to restrict access to our internal applications only and it dropped off from WLC in 5 secs. These are in flexconnect mode, I used the flexconnect ACL and applied to one...
We have a standlone ISE node running version 2.1 and we are planning to updagrade this to either 2.3 or 2.4. We are thinking of taking a snapshot of the existing server and build a new server (with a different IP and host) for upgrade purpose. I was ...
We are upgrading our WLC 2504 from version 8.1.102.0 to 8.5.131.0. Need to know if this version will be compatible with ISE 2.1, the release note says 2.2 and 2.3 but did not mention about 2.1. Can someone confirm on this?
We are still facing this issue with ISE 2.3. Made some changes and worked with support to reset the database, the active connections came down and stayed low but it slowly it came back up in the last 6 months. So you will have to monitor the system f...
We are experiencing the same problem with ISE 2.3. Can it be an issue when both the auth called station ID and acct called station ID are set to use the IP address of WLC? Please confirm.
Worked with TAC on this and got a reply that ISE 2.1 patch 3 and below had a bug with reports. This bug was fixed in patch 4. https://bst.cloudapps.cisco.com/bugsearch/bug/CSCve50763 Hope this helps someone.
Jason, Thanks for the reply. I'm planning on doing it but wanted to check with the community before I get to them. Is this a known issue with 2.1? We are planning to migrate to 2.3 soon and wondering if that would have a better reporting than 2.1. Wh...
