About mhanderson

mhanderson · 01-22-2015

We are attempting to install a Telepresence VTC system. We are attempting to register the MCU (5320) (4.5) to TMS (14.6). We are using a virtual VCS as the Gatekeeper. When we attempt to Add the MCU from TMS we get a warning "No bandwidth defined on ...

mhanderson · 12-19-2011

Okay,I have looked through all of the discussions on this topic and I have tried several ways to associate an ephone-dn with an FXO port.IOS: 15.1(2)TMy simple configuration:!voice-port 2/0/8!!dial-peer voice 80 pots description Telcore_Intercom dest...

mhanderson · 07-23-2003

I have a situation where I will have a 2600 with the Firewall Feature Set behind a PIX (don't ask why, please, plus the PIX does not have IPSec licensing). How do I configure the outside interface ACLs to pass IKE, SA, and IPSec traffic to the inner ...

mhanderson · 11-20-2002

A customer has an empty 3660 that we proposed to be used as a Gatekeeper for video and voice (VoIP not CallManager). I was looking in the Software Center and I see that there is a Voice Feature License of $40,000 for a new Gatekeeper. What is this al...

mhanderson · 06-26-2002

Excuse my ignorance, not having experience with SRST. Assume I have CallManager and 2600's. If I want to install SRST on the 2600s, I'll need the correct IOS image. However, where do I get the SRST Feature License and what do I do with it once I get ...

mhanderson · 01-23-2015

Just as you probably figured it out the MCU did not come with Port licenses. We ordered them, so either the distributer has them or they are sitting on someone's desk in a plain white hard envelope. I need to get back to our procurement people and se...

mhanderson · 01-23-2015

Pat and Wayne,The MCU is registered in both the VCS and TMS. We had previously created Zones for ISDN and IP but being noobs we really didn't know what they were for. Since this installation is IP only we did not think that Zones were necessary.So......

mhanderson · 01-22-2015

Hi Pat,We didn't create any IP Zone. The reason we didn't create an IP Zone is because we don't have any ISDN connections and it looks like the Zone creation depended on having the opportunity to choose between ISDN and IP.Screen shots are going to b...

mhanderson · 01-25-2012

Four (4)

mhanderson · 12-20-2011

Sam.As Rob stated, it's a "legal" issue. However, if you ever want to switch to a CUCM environment you can transfer your RTU licenses for DLUs.Just my $.02.Mark

Member Since	‎12-13-2000 11:00 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	42

User Statistics

User Activity

MCU registration to TMS fails with "no ip bandwidth..."

Cannot associate an FXO port with an ephone-dn

IPSec VPN THROUGH a PIX

Gatekeeper Voice Feature License - What's up?

SRST Installation

Just as you probably figured

Pat and Wayne,The MCU is

Hi Pat,We didn't create any

Cisco Voice Gate way

seat license and rtu license