About Moudar

Moudar · 10-23-2024

Hi, We are currently using RADIUS (ISE) for authentication, and while we can successfully log into the CLI of our Cisco 9800 via the AAA server, we encounter a "Wrong Credentials. Please Login again." message when attempting to log into the GUI. The ...

Moudar · 09-27-2024

Hi While using the cable diagnostic tool to check the cable, I observed that Pair B measures 137 +/- 10 meters, while the other pairs are approximately 60 +/- 10 meters. How is this calculated, considering that all pairs belong to the same cable? So...

Moudar · 07-18-2024

Hi, Any one knows what is fixed in Prime 3.10.5? Release notes!

Moudar · 06-27-2024

Hi I have an Access Point (AP) powered via Power over Ethernet (PoE) from a power injector. When the switch reloads for any reason, the AP loses connectivity with the Wireless LAN Controller (WLC) and fails to re-associate, even though it can ping th...

Moudar · 06-26-2024

Hi I got a branch office with small Checkpoint SMB firewall, and I got a Cisco AP 2702 connected to it. All other devices are working correctly! The AP is getting an IP address and asking the correct DNS server about "CISCO-CAPWAP-CONTROLLER." yet i...

Moudar · 10-26-2024

This configuration works well: aaa authentication login default group RADIUS_AUTH local line aaa authentication dot1x default group RADIUS_AUTH aaa authorization exec default-web group RADIUS_AUTH local aaa authorization network default group RADIUS_...

Moudar · 10-23-2024

do we need to add anything else ? for web auth.

Moudar · 10-23-2024

It works now adding "aaa authorization exec default group RADIUS_AUTH" to the aaa configuration I don't realy understand why adding that line would allow aaa to GUI, when login to CLI it goes directly to #mode

Moudar · 07-19-2024

What Leo suggest seems to be correct!

Moudar · 06-28-2024

WLC 5520 version 8.10.190 AP 9120 My setup is a bit unusual. I have a 9120 AP connected to a Check Point SMB firewall. This firewall has a VPN connection to the central office where the WLC is located. The setup works, but only if the firewall reboot...

Member Since	‎07-31-2018 11:27 AM
Date Last Visited	‎11-06-2024 12:15 AM
Posts	331
Total Helpful Votes Received	56

User Statistics

User Activity

Cannot login to WLC 9800 GUI using Radius

Cable-Diagnostics

Cisco Prime 3.10.5

AP can ping WLC but still not associating

Cisco AP connected to Checkpoint SMB firewall

Re: Cannot login to WLC 9800 GUI using Radius

Re: Cannot login to WLC 9800 GUI using Radius

Re: Cannot login to WLC 9800 GUI using Radius

Re: Cisco Prime 3.10.5

Re: AP can ping WLC but still not associating