About Hans Martinez

Hans Martinez · 08-14-2024

I try to implement HSRP + BDF over 400 BVI at ASR9K, I need to know if exist a best practice about configure HSRP and BDF.I found this link: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/ip-addresses/command/reference/b-ip-addresses-...

Hans Martinez · 06-14-2024

Hi Community, I need to enable a connection by STM-1Channelized to map E1s from pseudowires with this hardware. ASR 9010RSP800 - XR 7.5.2 / 7.9.21A9K-48X10GE-1G-SE or A9K-24X10GE-1G-SESmart SFP - SFP-CH-OC3STM1-I https://tmgmatrix.cisco.com/?si=SFP-C...

Hans Martinez · 06-15-2023

Hi community, I'm working on implementing EEM on a Cisco ASR9K; I need to be able to determine by syslog when a track changes UP/DOWN status. When I add the lines of "event manager environment" the system only leaves the last one of "environment". I ...

Hans Martinez · 06-13-2023

Hi Community, I'm trying to install DNAC on appliance DN2-HW-APL with reference the "Cisco DNA Center Second-Generation Appliance Installation Guide, Release 2.1.2". https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-an...

Hans Martinez · 02-28-2023

Hi, anyone how can help to me and validate or recommend a topology to implemente a cluster of CNR for DHCP on failover pair; using a second Nic to that redundancy service? Topology one: It's posible implement a failover-pair if de IP address on seco...

Hans Martinez · 06-15-2023

Solved event manager environment _syslog_pattern1 .*(track 6 state Track_Up)event manager environment _syslog_pattern2 .*(track 6 state Track_Down)

Hans Martinez · 06-15-2023

Hi Preston; I'm going to proceed with open a TAC case; thank you by your support and time.

Hans Martinez · 10-20-2022

Hi Marvin, the version 6.6.1 because the minimum release to integrate some new devices, but you are right 6.6.7 is a better option to upgrade; and in this moment 7.0.4 can wait because we have another device on 6.2.3 but need to do other priorities n...

Hans Martinez · 10-20-2022

Hi BB; thank you by your suppport, I did a Lab of upgrade. Lab 1: FMC 6.4.0.13-57 >>> 6.6.0-90; successful. Lab 2: FMC 6.4.0.13-57 >>> 6.6.1-91, successful. I'm goning to go by the LAB2 on real environment. Thanks a lot.

Hans Martinez · 01-11-2019

Hi Andrea, thank you for your support. Yes I was saw the doc Nexus 9000 TCAM Carving before as reference in other post. I decide get out 512 of RACL to set later at PACL, I used 512 to PACL because is de default value on Nexus 93120. The confi...

Member Since	‎04-19-2011 04:37 PM
Date Last Visited	‎08-23-2024 07:50 AM
Posts	26

User Statistics

User Activity

ASR 9000 / XR / 7.x.x / HSRP/VRRP + BFD Best Practice

ASR9K - SFP-CH-OC3STM1-I - Enable STM1 Config

EEM - ASR9K - EEM Scritp of Multiple line of event manager environment

DNA CENTER 2.1.2 INSTALLATION PROCEDURE / INSTALL LOOP / NIC ISSUES

CPNR 10 / Best topology to deploy a failover on pair local servers

Re: EEM - ASR9K - EEM Scritp of Multiple line of event manager environ

Re: DNA CENTER 2.1.2 INSTALLATION PROCEDURE / INSTALL LOOP / NIC ISSUE

Re: FMC 2500 / Upgrade from 6.4.0.13 to 6.6.1 / Correct Path to do

Re: FMC 2500 / Upgrade from 6.4.0.13 to 6.6.1 / Correct Path to do

Re: Nexus9000 93180YC-EX - NXOS 7.0(3)I6(1) - PACL Resources