Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey team so i have a few IR1101 and i wanted to start to use LLDP a bit more to approve devices to the network. and on the IOS-XE this is easy device-sensor filter-list lldp list lldp-listtlv name chassis-idtlv name system-descriptionand all the info...
Hey team was going to try to upgare the ISE from 3.0 patch 8 to 3.3 Patch 3 (recommenden) I go for the URT upgrade, but i get stuck on trying to get the file in to the ISEISE/admin# copy ftp://192.168.2.2/ISE/ise-urtbundle-3.3.xxx-1.0.0.SPA.x86_64.t...
Hi so we just orderd a new AP9120-AXI-E and a new controller. But i just wanted to test the AP against the current installation. Dint work, so my first tought is that the AP is to new for the firmware we are runingis there a list of what works ? Ru...
HI team i am trying to update the local dns to add a new domain but everytime i try to change it i just get "alotoften.local is not a valid internal domain" localdns: Local DNS Servers: All DNS ok (green)UDP lookup of 10.10.10.10 @10.10.10.10 ok: alo...
Hi! So i am trying to get the AutoInstall to work on a router. I configed it to use DHCP interface GigabitEthernet0ip address dhcpduplex autospeed auto I can monitor the DHCP and see that it gets the DHCP: Scan: TFTP Server address Option: With m...
Hi Yes i made a TAC case out of it. And you will need to make a on preem installation. You need to extract the files from "ir800-universalk9-bundle.SPA.159-3.M4.bin" so you get thisir800-hv.srp.SPA.3.1.21ir800-ref-gos.img.1.14.0.6ir800-universalk9-...
