Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there a way to use a location of a presenter to trigger a camera switch with preset zoom and angle?Ask is to use a camera trigger like what is used in Presenter Track to trigger a switch to a second camera and have that camera be zoomed in to a se...
Issue: Some Attendees are unable to join the webinar even after registration.Scenario: I have a user creating a Webinar Series and they are allowing registration to a single event in that series. They are creating the Webinar with Registration Requi...
Is there a max number of contributors who can be assigned to a given Webex Webinar Series? When I go to add the additional contributors they show up in the search but when I invite them, it just disappears and they don't show up in the list.
My registration page for the webinar series is showing the wrong information. A little over a week ago, the time zone and time information was showing correctly in Google Chrome but was showing UTC time zone and information in Edge. As of today, bo...
Technically you can record your walkthrough and then play it back in Webex using screen share and talk over it. You can even use things like the Stage Layout and record just the stage to keep the video focused on the content. You could also do both...
Correct, You can find the serial number directly on the outside of the camera, but you need to enter it into the codec itself using the AssignedSerialNumber field. Just make certain you add it to the field that corresponds to the correct input on th...
Have you assigned the camera's static IP address to the codec? I had a similar issue, but I was running through a POE switch and assigning the static IP address fixed the issue. If you access Control Hub or the codec directly you can assign the stat...
Sorry, you are correct, I assumed you meant the current Webex Room devices and you were just trying to use the BYOD feature via USB. However, I would still look into the cabling issue as that was the most common problem on that model as well with sl...