Hi, I just started working with Huawei switches and it is possible to make a switchport hybrid port and tag untagged frames. See the below Huawei commands.port link-type hybrid = command to make a switchport hybrid in Huaweiport trunk pvid vlan x = c...
Hi, i am trying to understand how vrf, rd, and route-target import/export works. I have this simple topology and i am running iBGP between the routers in vrf 865, neighborship has been established and i have configured same rd and route-target on bot...
Hi guys! I am a newbie and trying to learn and understand BGP when connecting to two different ISPs with multiple(2) local routers. I have vlans that span, using sub-interfaces and HSRP between CORE1 and CORE2. CORE1 is the ACTIVE HSRP thus forwar...
Hi, I am trying to setup a lab with vWLC and AP to practice with. But i am cant download the vWLC Cisco Wireless LAN Small Scale Virtual Controller Installation with 60 day evaluation license. AIR_CTVM-K9_8_5_151_0.ova at https://software.cisco.com/...
Hi There is something that is bothering me and i would need help to clarify it. We all know that each vlan is its own broadcast domain. For example, broadcast for VLAN 10 does not extend to VLAN 20.. So if a pc connected to VLAN 10 send a DHCP broa...
Hi, no it has nothing to do with voip. It is just the ability to make a switchport hybrid in Huawei switches and then be able to tag untagged traffic coming in on the trunk for example. I guess Cisco does not have such.
@MHM Cisco World i will try it and see. I just started working for network service provider and they are using huawei devices, so it is kinda confusing as i am more into cisco. But that is the kind of setup their are using to separate each ISP and to...
Hi, thanks for your help. I think i fully understand it now. The import/export is to enable the routes to be put in the correct vrf and the routes must be advertise via the network command or redistributed before the neighbor router can see them.
Hi Giuseppe Thanks for the reply. I think i do understand the first solution you provide. The link that i am going to create between R1 and R2 does it have to be IGP or iBGP and how do i advertise the 192.168.128.0/25 and 192.168.128.128/25 to res...
