Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi AllMy customers had problem with 6500 series suppervisor. They need to purchase 6513E with supervisor 2T within August 2011 but the supervisor announce date still unknown.If anyone know about the Sup2T information - Part Number Pricelist and Annou...
Hi ,All I can not authenticate WLSE Express using external database with AD. I have downloaded the agent to the Domain Controller and install it on AD.At WLSE Express I found log "Error Server 0 RemoteDomainAuth server domain-auth: Agent API encount...
When I connected my adsl router and got ip address is 10.1.1.1/8 then I use remote access vpn terminating on firewall then authentication work fine and got ip address from the pool is 10.7.0.1/16 but I can't access local lan from this if I dialed-up...
When I connected my adsl router and got ip address is 10.1.1.1/8 then I use remote access vpn terminating on firewall then authentication work fine and got ip address from the pool is 10.7.0.1/16 but I can't access local lan from this if I dialed-up...
When I use highest ip address of active interface as a Router-Id of the router if its active interface goes down then the router must reestablishing adjacency with other neighbor router or not. please clarify or provide helpful link.Thank in advanc...
Hi Terry,I've been faced this problem.This problem will occur on MS IAS RADIUS.Because when use PEAP with MS IAS the client will send "Roaming Identity" instead of username/passwd. So log file on RADIUS will see anonymous as username ( default Roamin...
Hi Mujeeb Are you using default route point to Gateway Router?If yesWhat is next-hop's type which you use?1. Next-hop IP address ip route 0.0.0.0 0.0.0.0 a.b.c.d2. Connected interface ip route 0.0.0.0 0.0.0.0 fastEthernet x/xIf you use 2 then y...
Hi guys Thank for input. So, the neighbor routers that associate with active interfaces must reestablish adjacency again but the router-id in hello packet has not been changed, please clear me out
Hi Glent thank for your comment.I assigned default gateway into every pcs/subnet and test.No ip routing , router , show ip route commands etc. on box.Thank you
Hi Friend 1. I can be created another vlan , assigned port into it , create interface vlan and assigned ip address then that the interface vlan also up. 2. I found can't route between hosts of each subnet/vlan.3. But it can be done about this Ping :...
