Hi All,Can anyone advise what is the best practise for deploy QOS for webex traffic (voice and video)? any links to configuration examples etc would be helpful.
Is there a way in Intelligence centre to be able to run a cdr report with the number of calls etc where i want to know the specific stats for the same hours during the day (e.g after hours) everyday rather than a 24 hr period. For example
I want to...
Upgrading UCCX from 11.5 to 11.6(2).1)What is the supported Vmware tools version for 11.6(2) ?. If there clear matrix anywhere2) When going from 11.5 to 11.6(2) is COP file required?3)When going from 11.5 to 11.6(2) do we have to change the NIC adapt...
We have recently changed from ISDN to SIP and have noticed a difference and need some help clarifying this. example:previously --> Any external number 444000(e.g mobile etc) calls deskphone 555000 which has a forward to their mobile. On their mobile ...
I would like some help clarifying Dial peer setup and configuration. Please see setup above. we have a CUBE router which has a E1 that is to be used for faxing (faxes plugged into ATA devices) and SIP trunk to the Telco for all calls. How would my ...
So if there was no calls during an interval it will not display it ? what i mean is when i run that report there is alot intervals that are missing so im assuming there was no calls during that time?
Joel,This has been operating for a few years now. Cisco Adaptive Security Appliance Software Version 8.2(2) Device Manager Version 6.2(5)System image file is "disk0:/asa822-k8.bin"IE version is 9.0.8112.16421i upgraded to 825 but same thing. I dont w...