Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
are there any resources you can point me to so that I could learn how to script portions of the CUCM install if possible. I would like to be able to populate the database in a bit more automated way. Looking at 7.X and above.
I have a stange issue where I have periodic call drops during call setup. Happens on PRI and POTS alike and I have seen it happen once or twice on phone to phone. Its Random. Calls dropped looks like normal call clearing. This is on a CME version...
Can I make an overlay line flash instead of ring when a call comes in? I don't have a system in front of me to test. When I set up an overlay for a line, I don't have any silense options, but can I do something local to the phone (and no, turning t...
I have looked at a couple posts on my issues and cannot narrow mine down. Inbound calls to FXO fail basically. I used CCA to configure and inbound calls were first plar'ed to the AA. The call comes in and once tranferred to AA the call disconnects...
Not sure if you had any success on this, but Singlewire does have a solution now that may work for you. Its basically an alert sent when a dial string is pressed. Check this out, not sure if it will do exactly what you want but its a start. Its fr...
Can this work at a remote site over MPLS to record back to the centralized recording server? Any idea if IPCelerate supports this, if not who can you recommend for the MPLS application of this?
