C7 SS7 on AS5350 cofiguration.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-20-2004 11:40 PM
Hi guys,
I have being cofiguring an AS5350 for voip for 2 ends. At my end the connection is C7 SS7 signalling from the switch to the router.
The router and the switch is not seeing each other.
The following are my configuration on the E1
controller E1 3/1
framing No_crc4
channel_undergroup timeslots 1-31 nfas_d primary nfas_int 1 nfas_group 0 g732 ber
The switch guys said I need to configure point code and they insist, before both the switch and the router will see each other.
Anybody with an idea or sugestion?
I configured switch-type to be isdn switch-type primary-ni.
- Labels:
-
Voice over IP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-21-2004 05:40 AM
Do you have PGW? you need to have PGW in order to use SS7.
http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/index.htm
Regards,
Santosh
