Cisco 2801 and VIC2-2E/M Card

[hardik_tankaria]

Hi Experts,

One problem with my cisco 2801, when I have inserted the E&M card it is not supporting on the slot. The output of show diag is as attahced.

IOS is : c2801-ipbase-mz.124-1c.bin

Any help would be appreciated..

Thanks,

Hardik..

[Brandon Buffin]

You need a voice capable IOS feature set. The minimum is IP Voice for this card. Please see the following link for confirmation.

http://www.cisco.com/en/US/products/hw/modules/ps5365/products_data_sheet0900aecd801c595e.html

Hope this helps. If so, please rate the post.

Brandon