Configure > Extensions

[Yacine Hidouche]

When I try to log into  CUE 3.2 web interface  http://10.1.10.1/Web/cme/LayoutAction.do?submitType=INIT&page=displayDN
in system paramater I got an error message
"Error: Unable to login as administrator to the Cisco CallManagerExpresse at site local"

the loggin is working properly but not for the Extensions, Phones and System Parameters

Router    : CISCO3845

Configure > Extensions

Site Name:	local
Error: Unable to login as administrator to the Cisco CallManagerExpress at site 'local'. Details: CME login failed

[Walter Solano]

Hello,

Yanice please check if you have added the "ip http path flash:/gui" command to your configuration, also check if you have connectivity to both CME and CUE if you dont you can use static routing in the PC to be able to reach them.

HTH

Please rate this post if was helpful

Walter Solano

[Yacine Hidouche]

Hi Walter,

It is now working pefectly, all I did was,

no ip http path flash:/gui

ip http path flash:/gui

Thank you very much for your help

Yacine

[Walter Solano]

Hello Tacine,

I am happy to hear that everything is working now and I was able to helo you .

Thanks.

[omaryusoff]

Hello Walter, 

I have the same problem and even after 

ip http path flash:/gui,

the problem is still not resolved.

Can you help me?

Thanks in advance