fxo configuration

[a.kachroo]

i have two routers each having two fxo cards and at each location one pstn line is terminated into one fxo port and other port is getting connected with the local epbx.

Now my question is how can i configure these routers,so that if i dial my pstn number outside say office A, that call will land in my office A (local) and in the second case my call will land at office B and in third case my call will land outside my office B.

Also i also want to dial from my office A to dial office B and outside office B.

I think this is possible but i am not getting the right configuration.

Arun Kachroo

[thomas.chen]

The sample configuration in this link may help u

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t3/dt_fxodt.htm

[EPHRAIM MANI]

Hi Arun let me know whether this issue got resolved.

Thanks EM

[dford333]

in your dial peer you want to set preferences

preferences 0 is default for

perference 1 office b

preference 2 office c

example

dial-peer voice 1 pots

description ** T1 PRI pots office 1 **

preference 1

destination-pattern 91.......... *office 1#*

port 0/1/0:23

forward-digits 11

dial-peer voice 1 pots

description ** T1 PRI pots office 2 **

preference 2

destination-pattern 91.......... *office 2#*

port 0/1/0:23

forward-digits 11

dial-peer voice 1 pots

description ** T1 PRI pots office 1 **

preference 3

destination-pattern 91.......... *office 3#*

port 0/1/0:23

forward-digits 11

you have to translate the above for your topology.

[paolo bevilacqua]

Hopefully after 2 yrs 9 months the issue has been solved :)

[dford333]

you got to be kidding

[paolo bevilacqua]

Yes exactly :)

Posted by: a.kachroo - Dec 2, 2004, 4:59am PST

[EPHRAIM MANI]

Anyway good job done but where's the A.kachroo the poster.

Thanks EM-