08-21-2006 11:17 AM
hi all.
I have 4 lines to the PSTN connected to a FXO card, the problem is when somebody in the PSTN call and hung before they answer the IP phone, the IP phone continuous ringing and the FXO port is not released, to stop ringing and release the port, in need to off-hook the IP Phone
The problem is when I configure connection plar to a IP Phone, without connection plar the FXO port ir release correctly.
the FXO card is a VIC2-4FXO
the voice-port configuration is:
voice-port 0/1/0
timeouts call-disconnect 1
timeouts ringing 30
timeouts wait-release 1
connection plar 1202
!
voice-port 0/1/1
timeouts call-disconnect 1
timeouts ringing 30
timeouts wait-release 1
connection plar 1202
!
voice-port 0/1/2
timeouts call-disconnect 1
timeouts ringing 30
timeouts wait-release 1
connection plar 1205
!
voice-port 0/1/3
timeouts call-disconnect 1
timeouts ringing 30
timeouts wait-release 1
connection plar 1205
08-24-2006 11:58 AM
Can you change "connection plar" to "connectin plar opx" and then perform shut/no shut and then try again?
Let me know how that goes.
08-25-2006 10:35 AM
thanks
The "connection plar opx", resolve the problem
great aid
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide