How to check DSP modules installed status

[Shibu1978]

Dear All,

How will I check up the DSP modules installed status in cisco 7206 router.

How can i know whether those DSP modules are installed with

2 Channelized E1/PRI port(s) or in the chasis itself.

Thanks

Shibu

[Adrian Saavedra]

Hi Shibu,

You can try with show diag and show voice dsp commands.

Hope this helps you, if it does please rate.

Best regards,

- Adrián.

[Shibu1978]

Dear Adrian,

Thanks for the quick reply. please find attached the output of those 2 command . can you tell me where the DSP modules are installed ?

[paolo bevilacqua]

The 7200 chassis does not support direct installation of DSP modules.

Consequently, these are installed in the PA, as the output of the commands is telling you.

[Shibu1978]

Dear,

Thanks for the reply.

Is it PA - Chanalized E1 port.

Thanks

Shibu

[Nicholas Matthews]

'show voice dsp' should show you the DSPs on a platform.

-nick

[Shibu1978]

Dear Nick,

Please find the sh voice DSP.

-HQ#sh voice dsp

DSP DSP DSPWARE CURR BOOT PAK TX/RX

TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT

==== === == ======== ======= ===== ======= === == ========= == ===== ============

C549 010 01 g729r8 4.1.41 busy idle 0 0 1/1:15 30 0 6823409/5935

157

[slawomir.daleszynski]

to determine where the dsp modules are installed try to issue show inventory command.

[paolo bevilacqua]

slawomir.daleszynski wrote:
to determine where the dsp modules are installed try to issue show inventory command.

You are responding to a 4 yeard old thread. The people involved have since then moved on.

[Mark Ruhland]

Its still useful information Paolo, which is why they don't delete these threads.

[paolo bevilacqua]

Mark Ruhland wrote:
Its still useful information Paolo, which is why they don't delete these threads.

Being answering questions here (including this one) since years, indeed I'm aware of that.

[Ansir Ilyas]

R1# show inventory

really useful command for basic hardware lookup. Thanks 

[MohammudAllyKhodadeen9629]

It indeed helped! Thanks a lot