06-27-2007 10:16 AM
Trying to setup a Hunt Pilot for the Main line of a new school. I have it working but when all of the lists have been exhausted, how do I make it transfer to a voice mail box? I even tried forwarding all calls to voicemail and it stil comes back with a fast busy after the designated ring time.
CCM 4.1(3) sr4d
Unity 4.0(4) SR1
IP Phone CP7961G
Solved! Go to Solution.
06-28-2007 08:58 AM
Hi James,
This should be applied at the "Hunt Pilot" Level, if you configure a Destination # (DN of Unity VM Pilot) under the settings shown below, you should be good to go;
Hunt Forward Settings
Forward Hunt No Answer - When the call that is distributed through the hunt list is not answered in a specific time, this field specifies how to forward the call.
Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)
Forward Hunt Busy - When the call that is distributed through the hunt list is busy in a specific time, this field specifies how to forward the call.
Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)
Maximum Hunt Timer - Enter a value (in seconds) that specifies the maximum time for hunting.(Used in conjunction with Forward Hunt Busy)
From this good CCM 4.1.3 doc;
Hope this helps!
Rob
06-28-2007 09:54 AM
Good stuff James! Glad to help :)
Good luck with the rest of your deployment,
Rob
Please remember to rate helpful posts.......
06-28-2007 08:58 AM
Hi James,
This should be applied at the "Hunt Pilot" Level, if you configure a Destination # (DN of Unity VM Pilot) under the settings shown below, you should be good to go;
Hunt Forward Settings
Forward Hunt No Answer - When the call that is distributed through the hunt list is not answered in a specific time, this field specifies how to forward the call.
Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)
Forward Hunt Busy - When the call that is distributed through the hunt list is busy in a specific time, this field specifies how to forward the call.
Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)
Maximum Hunt Timer - Enter a value (in seconds) that specifies the maximum time for hunting.(Used in conjunction with Forward Hunt Busy)
From this good CCM 4.1.3 doc;
Hope this helps!
Rob
06-28-2007 09:44 AM
Worked like a charm.
Thanks.
06-28-2007 09:54 AM
Good stuff James! Glad to help :)
Good luck with the rest of your deployment,
Rob
Please remember to rate helpful posts.......
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide