Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
522
Views
0
Helpful
2
Replies

PGW - routed IAM looses part of the 'User Service Information' Element

avalchev
Level 1
Level 1

‎02-11-2003 07:19 AM

Hi,

I have PGW 9.3(2) with two AS5350 configured both for termination of IMTs and used as SLT (two E1 links with channel 16 used for SS7 signaling). The PGW is not in nailed mode, but in call-routing mode.

The test I made is very simple - making a call from one side (TRG1001) which is routed to the other side (TRG1004).

I capture the messeges at both sides and see that part of the service information like for example 'User rate - 9.6 kbit/s, V.6 and X.1' and many others are loosed.

Somebody have any idea about that?

Best Regards

Labels:
0 Helpful
2 Replies 2

mmellet
Level 3
Level 3

‎02-17-2003 10:07 AM

Check for your configuration, and use the debug commands to check the configuration. I found a bug CSCuk38210 related to AS5350 when using SLT.

0 Helpful

avalchev
Level 1
Level 1
In response to mmellet

‎02-17-2003 11:37 PM

Hi,

the problem was not a bug, but wrong ISUP variant. Thank you for trying to help.

Regards,

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents