PGW - routed IAM looses part of the 'User Service Information' Element

[avalchev]

Hi,

I have PGW 9.3(2) with two AS5350 configured both for termination of IMTs and used as SLT (two E1 links with channel 16 used for SS7 signaling). The PGW is not in nailed mode, but in call-routing mode.

The test I made is very simple - making a call from one side (TRG1001) which is routed to the other side (TRG1004).

I capture the messeges at both sides and see that part of the service information like for example 'User rate - 9.6 kbit/s, V.6 and X.1' and many others are loosed.

Somebody have any idea about that?

Best Regards

[mmellet]

Check for your configuration, and use the debug commands to check the configuration. I found a bug CSCuk38210 related to AS5350 when using SLT.

[avalchev]

Hi,

the problem was not a bug, but wrong ISUP variant. Thank you for trying to help.

Regards,