12-20-2004 06:29 AM
Telco only sends last 2 digits as called party number.
These 2 digits represents the extension number and not the main-number.
I also expected to see (parts of) the main-number of the ISDN-2 box.
I need to create a route-pattern on our callmanager to match the incoming numbers.
This particular situation is in Austria.
Does anyone know who to deal with this ??
12-23-2004 06:42 AM
Do not follow the complete network picture e.g. how are you connected to PSTN (e.g. ISDN PRI/BRI), what gateways are used (MGCP, H.323) etc. And importantly what are you try to match the incoming numbers to? e.g. incoming 2-digit number to 4-digit internal extension?
But depending upon the type of PSTN interconnection and the gateway used: you may look at using translation patterns on the CCM to achieve the matching (number prefixing etc) and then correspondingly route the calls to your extension directly or to a single extensions (destination). If you're using H.323 on IOS gateways, then you may use translation-rules for number prefixing etc.
01-10-2005 01:08 AM
Thanks for the tip, indeed I was able to resolve this issue by using the correct translation pattern on the callmanager.
It's indeed a H323 gateway connected to an ISDN BRI.
Thx
erwvan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide