Hello all, I use AS5300 like a SIP voice gateway. But when Iuse AS5300 to call a SIP Proxy, I found that inINVITE message have no tag in it. like these;----------------------------------------------------From: "3660110" <sip:3660110@166.34.245.230>...
Hi everybodyI have the following translation rule which is doing the following: if iscoming a number which is starting with 00, is adding 1111 in front of it. Ifis coming a number which is starting with 0[1-9] is adding 2222 in front.translation-rule...
Telco only sends last 2 digits as called party number.These 2 digits represents the extension number and not the main-number.I also expected to see (parts of) the main-number of the ISDN-2 box.I need to create a route-pattern on our callmanager to ma...
Hello NetProf!I'm repeating my request for help, mabey clearing a few things out.1. We have a cisco 1760 router running CCME2. Some connected to it cisco 79xx ip-phones3. A third party gatekeeper - MikroTik router4. Every device is logged in the gate...
We have one PIX 515E-UR in Los Angeles and another PIX 515E-(Restricted) in Seoul. What kind of options do we have in terms of setting up VOIP? Are there any links to instructions in question? Thanks in advance.
Hello!Recently we've developed a test VoIP network combined out of a verry differently branched devices. It's working quite well, excluding one part.The problem occures when trying to call from a CCME Cisco IP phone registered in a gatekeeper to a Mu...
I have 10 2621XMs each connected directly to G3 PBXs. They supply VOIP call lines to the PBX via a direct T1 (NM-HDV-1T1-24). However, when the direct T1 is up between the PBX and the CISCO router, how do I tell the PBX that VOIP calls can't be compl...
My customer is moving his PBX from site A to site B but wants to keep the PRI30 termination at Site A.Site A and B are linked by LES100I think I need to connect a 2651 with VWIC-1MFT-1E at each end, the VWIC at Site A will connect straight into the P...
I'm currently deploying a VOIP from a branch office with an existing VOIP at the HQ, I could place a call from own end BO clear, but could not receive from the HQ, I changed from an FXO to an FXS but still the same problem.I wonder if someone could m...
Dear all, I am confused after reading this document http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/fqcprt7/qcfdfsrv.htm It classifies TACACS traffics as DSCP of 10 which has lower priority than Telnet (DSCP of 18). How...
I have Panasonic PBX-->FXO-->1751V------WAN-----1751V-->FXO--Panasonic PBX. I am facing a serious problem with FXO on both ends becoming busy after some few initial calls.What is the exact Cisco solution for this FXO disconnect problem? I have read a...
Hello all,I have a SIP server NATted behind a PIX 515e (IOS 6.3). The problem is that endpoints will register with the SIP server only if I remove username/password authentication. If I remove the natting (SIP server and endpoint can directly connect...
Hi,i have a router with one pri and one bri. i want to seperate two channels from pri to bri for connecting video conference box. is there a configuration example and is there any restrictions ?Regardsumit
Hi all, We have an AS5850 registered with a softswitch using MGCP, but the AS5850 is sending this message:Dec 28 20:49:48.137: send_mgcp_msg, MGCP Packet sent to 200.75.xx.xx:2727 --->Dec 28 20:49:48.137: 500 121454 Endpt UnknownHere is the AS5850 co...
