Telco only sends last 2 digits as called party number

[erwvan]

Telco only sends last 2 digits as called party number.

These 2 digits represents the extension number and not the main-number.

I also expected to see (parts of) the main-number of the ISDN-2 box.

I need to create a route-pattern on our callmanager to match the incoming numbers.

This particular situation is in Austria.

Does anyone know who to deal with this ??

[fchaudhr]

Do not follow the complete network picture e.g. how are you connected to PSTN (e.g. ISDN PRI/BRI), what gateways are used (MGCP, H.323) etc. And importantly what are you try to match the incoming numbers to? e.g. incoming 2-digit number to 4-digit internal extension?

But depending upon the type of PSTN interconnection and the gateway used: you may look at using translation patterns on the CCM to achieve the matching (number prefixing etc) and then correspondingly route the calls to your extension directly or to a single extensions (destination). If you're using H.323 on IOS gateways, then you may use translation-rules for number prefixing etc.

[erwvan]

Thanks for the tip, indeed I was able to resolve this issue by using the correct translation pattern on the callmanager.

It's indeed a H323 gateway connected to an ISDN BRI.

Thx

erwvan