03-07-2022 01:46 PM
hi
is there any way to install two evm hd 8fxs on the 2821 router?
03-07-2022 01:48 PM - edited 03-07-2022 01:50 PM
CUE on a 2800 is supported.
But a SDD itself, no.
03-07-2022 02:00 PM
can you explain more?
03-07-2022 02:24 PM
CUE NM is a CUE software installed in a SDD. Everything is "wired in" to work with any ISR G1 and ISR G2.
An SDD/HDD will not work.
If, for example, the network has a 9300 switch, it would be different because the Catalyst 9300 can support a 120- or 240 Gb SSD add-on.
03-07-2022 02:33 PM
i wanna install two evm-hd-8fxs/did card to 2821 router, 0ne is working in slot 2 , but in slot 1 (nm slot) it shows this diag
Slot 1:
Voice VM-8FXS/DID Port adapter
Port adapter is disabled
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
Top Assy. Part Number : 800-22992-04
Board Revision : A0
Deviation Number : 0
Fab Version : 05
PCB Serial Number : FOC13033BS0
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : EVM-HD-8FXS/DID
Version Identifier : V04
Longitudinal Calibration : 00 20 20 20 20 20 20 20
20
CLEI Code : CNP5130AAD
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 04 16 41 01 00 C0 46 03 20 00 59 D0 04
0x10: 42 41 30 88 00 00 00 00 02 05 C1 8B 46 4F 43 31
0x20: 33 30 33 33 42 53 30 03 00 81 00 00 00 00 04 00
0x30: CB 8F 45 56 4D 2D 48 44 2D 38 46 58 53 2F 44 49
0x40: 44 89 56 30 34 20 D9 02 40 C1 D3 09 00 20 20 20
0x50: 20 20 20 20 20 C6 8A 43 4E 50 35 31 33 30 41 41
0x60: 44 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
03-08-2022 12:07 AM
Looks for me that is a limitation i guess :
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide