cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
801
Views
0
Helpful
4
Replies

Can't get ACD working not sure what's wrong

leealanmoreau
Level 1
Level 1

First off can users with SNR or shared extensions work with ACD?  I'm following the guide but can't get anything to work.

I made a basic ACD called 515 as the pilot number with all basic settings and put 2 of my extensions as members.  I then put on my autoattendant that pressing 1 goes to the ACD.

If I call the auto attendant and press 1, it says connected, then just hangs up.

I also don't know how to tell if I'm logged in to the ACD or how to log out.  It says in the help that you use the HLog key to log in and out, and I do have that key on my 7970 and 7960 but its grayed out on the 7970 and on both phones just says That key is not active here.  So not sure what's wrong, it seems like it's just not working in general based on it just hanging up when the AA transfers a call to it.  If I try to dial the pilot number I get a busy signal but I think it has to come from the AA from what the guide said.

Not sure what's going on or how to troubleshoot this, any suggestions?

4 Replies 4

paolo bevilacqua
Hall of Fame
Hall of Fame

EM works fine with ephone-hunt.

For B-ACD/AA trouble, take "debug voice application script" with "term mon".

A common cause of grayed out HLog softkey is that the extension part of ephone-hunt is shared. That is not possible to do, because it negates the purpose of pre-defined extensions and phones dedicated to answering calls.