09-26-2014 02:16 AM - edited 03-21-2019 10:19 AM
Hi all!
We have a Cisco 7926 desk phone connected to a Jabra Pro wireless headset. It's connected with a headset cable from the phone to the base station and set up correctly according to the instructions from Jabra.
My problem is that when we use the headset it ends a call when transferring. Using the original tube it works fine and this only happens when using the headset.
The thing is that we just upgraded our CUCM software to system version 10.5.1.10000-7 and after that it stopped working.
What i have tried is checked if the phone are headset activated, and it is. I have reconfigured the Jabra Pro headset.
Any suggestions are accepted with great thanks :)
Solved! Go to Solution.
09-26-2014 05:14 AM
There is a bug with 79XX phones transferring using headsets. You need to check CSCun26289
https://supportforums.cisco.com/discussion/12166856/problems-transferringanswering-calls-when-using-headset-79xx-phone-cscun26289
09-26-2014 05:14 AM
There is a bug with 79XX phones transferring using headsets. You need to check CSCun26289
https://supportforums.cisco.com/discussion/12166856/problems-transferringanswering-calls-when-using-headset-79xx-phone-cscun26289
09-26-2014 05:56 AM
Thank so much for the reply :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide