08-17-2010 01:31 PM - edited 03-21-2019 02:53 AM
Hi All
Is extension mobility supported on the UC500 platform? If this is possible can someone please provided out of band configuration guidelines to implement it.
Steve
Solved! Go to Solution.
08-18-2010 02:17 PM
and
https://supportforums.cisco.com/docs/DOC-9684/
This is not recommended if you are using CCA to configure your UC500.
Also, be aware of the OOB Guide-
Thanks,
Anthony
08-17-2010 04:26 PM
Extension Mobility is not currently supported through CCA. It will be in CCA 3.0-
https://supportforums.cisco.com/docs/DOC-12629
Thanks,
Anthony
08-17-2010 07:18 PM
Thanks Anthony,
What about extension mobility configuration via CLI?
08-18-2010 02:17 PM
and
https://supportforums.cisco.com/docs/DOC-9684/
This is not recommended if you are using CCA to configure your UC500.
Also, be aware of the OOB Guide-
Thanks,
Anthony
08-19-2010 12:17 PM
Thanks for your response and references.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide