Having issues getting UC320 deploymed behind RV220W. I setup using SMART designs, but still have an issue, unable to get UC320 on the network.
Here is my setup:
RV220W
WAN - Static IP to ISP
LAN
VLAN 1
Inter VLAN Routing - enabled
device management - enabled
port 1 - untagged
port 2 - untagged
port 3 - untagged
port 4 - tagged
LAN IP - 10.0.0.1/255.255.255.0
DHCP - enabled
DHCP - address range (10.0.0.150 - 10.0.0.254)
VLAN 4
Inter VLAN Routing - disabled
device management - enabled
port 1 - tagged
port 2 - tagged
port 3 - tagged
port 4 - untagged
DHCP - disabled
IP - 192.168.2.253/255.255.255.252
UC320
UC320 WAN connected to LAN Port 4 of RV220W
Setup to Route Voice Only
IP - 10.0.0.2/255.255.255.0
GW - 10.0.0.1
PC connected to Port 1 of UC320
Unable to get IP on PC connect to Port 1 of UC320
Unable to access IP 10.0.0.2 of UC320