04-14-2009 08:08 AM - edited 03-21-2019 01:02 AM
Hello everyone i am very new to cisco and have been testing out the capabilities of our UC520. i am having trouble finding documentation on how to configure an IP phone for a teleworker who will be bringing a phone home and connecting it to their dsl/cable, and then the phone being able to find its way to our UC520. I am looking for some config examples, i do have an ASA5510, if that helps. Any suggestions will be helpful.
04-14-2009 08:51 AM
Hi,
This part of the community is specifically for support of SPA9000 IP PBX and related phones and ATAs.
You'll probably have better luck at the UC500 community at:
https://www.myciscocommunity.com/community/smallbizsupport/voiceandconferencing/sbcs-uc500?view=discussionsSBCS/UC500
Regards,
Patrick
----------
04-14-2009 09:08 AM
Hi Ismael,
It can certainly be done. Please review the following VoD for instructions on how to do this, additional material and supported features:
https://supportforums.cisco.com/docs/DOC-10460
Thanks,
Marcos
04-14-2009 10:23 AM
ok, thanks Pat and Marcos, i will look at those VoD, thanks for the quick reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide