06-13-2013 03:02 PM - edited 03-21-2019 10:04 AM
Hello, a remote field tech is probably tired of playing johny-jumpup to physically reset ata's.
I want to spare the poor fellow, (and myself), but their seems to be no documentation on how to power cycle an SPA122 remotely.
How might one go about this from the web interface?
These things seem to have issues and I want to have a way to conviently reboot it.
06-13-2013 05:35 PM
If you are on an early firmware you must use internet explorer to see some web interface items.
Reboot is in there somewhere under administration.
06-14-2013 06:02 AM
As Robert said, it's in the web interface: Administration -> Reboot.
Alternatively, you can use this command line rebooter, which you could even schedule if you see necessary: http://www.freymond.ca/SPA112/
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide