03-31-2013 05:54 AM - edited 03-21-2019 07:10 AM
Hi,
In UC560 , it was configured for data and voice vlan and is connected to a switch, To the same switch i have connected a ADSL modem via Fastethernet. now when i tried to connect pc to switch, it's getting ip from uc560.(192.168.10.0/24). so I cant browse the internet. when i connected via wireless i have internet access and getting dhcp from ADSL modem(192.168.1.0/24). So how should be it configured in order to get internet access from wireless and wired. Is it necessary to have an Data vlan in UC560. when i checked DHCP leases, there are two dhcp lease from data vlan from UC560 without connection any pc to the network via switch.
Help me!
Solved! Go to Solution.
04-01-2013 06:15 AM
Or turn off DHCP on the UC and give it a static IP in your existing data network for management.
-Dan
Please rate useful posts.
03-31-2013 01:17 PM
hi,
remove the adsl modem from the switch, and connect it to the wan port of the UC.
04-01-2013 06:15 AM
Or turn off DHCP on the UC and give it a static IP in your existing data network for management.
-Dan
Please rate useful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide