03-20-2011 12:17 AM - edited 03-21-2019 09:34 AM
hello everybody
i have a spa8000 and i reseted this device to default factory by interactive voice response menu,
the problem is when i try to login to the web management of device , login page appear and want username and password
i tried username:admin password:[none] , username:admin password:admin , but it doesnt work
firmware version is 5-1-10
i appreciate your help
thank you
Solved! Go to Solution.
03-20-2011 05:33 AM
By default, there are no passwords assigned for either the Administrator account or the User account.
Probably your reset procedure failed.
Follow this: connect an analog phone to FXS 1 port and press **** then 73738# then 1 to confirm.
Regards.
03-20-2011 05:33 AM
By default, there are no passwords assigned for either the Administrator account or the User account.
Probably your reset procedure failed.
Follow this: connect an analog phone to FXS 1 port and press **** then 73738# then 1 to confirm.
Regards.
03-20-2011 06:28 AM
thanks for your answer daniele
but i tried it by analog phone and heard "option successful" but
still i have same problem and i can't login to device.
03-20-2011 10:01 AM
thank you very much daniele
i was wrong and i connected my analog phone to FXS 8.
but this time i did by FXS 1 and it works.
thank you again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide