Hello, I have followed the instructions as per the manual. http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/csbpipp/ip_phones/user/guide/525g_sip_user_guide_source/spa525_sip_user.pdf page 46. When I hit the Conf Button the 2nd time, it puts ...
This a a new SPA112 configured for RingCentral in the USA (www.ringcentral.com)I can make outgoing calls. I can receive incoming calls if they are a short period after I mad an outgoing call - but after a longer period the phone does not ring on inco...
Hi , We have a BE3000 that crash and did not boot. When start It request a recovery Disk. Does anybody know if we can fix it ? I have found in doc of BE3000 that does not support recovery Disk. Is that correctly? Is there a recovery disk available ...
Hi I configure ntp on UC500 andClock is unsynchronized, statum 16, no reference clock.I have ping to ntp server ,the customer enabled port 123 .My ios 15.0(1)XA3a .any idea?
Hi All i have a bunch of cp-6921 phones and I want to connect them to regular phone lines. How do I do that. If someone can please explain what interface to buy and how to configure in easy simple steps will be highly appreciated. Thank you Anish
Hello, I have a few users reporting that they are occasionally unable to make outbound calls even though inbound continues to work. Rebooting the ATA resolves the problem. When this occurs we do not see any INVITE messages from the ATA. The ATA's web...
Hi I have Cisco SPA525G2 and i need to register with our CUCM 10.5.2. Plz guide how to configure/register the phone.
Hi, I would like the SPA504G to ring when a voicemail has been received. I tried to find something on the phone to configure, but no luck. Anyone out there who can help or steer me in a direction? Thanks in advance!
Hi Additional licenses can be enabled to 2921? (example data and security) If possible a recommendation would increase the memory? Regards
Can the UC320 do failover for incoming & outgoing calls from FXO or FXS to SIP if FXO/FXS lines go down and also vice-versa (if SIP goes down failover to FXO/FXS)?If so is this automatic or is there a manual process?Thanks.
How do I access the SPA 303 admin webpage?http://ipaddress/admin/ does not workIn the phone the “security configuration” menu option “web service writable” is set to NO and I can not change to YES. The paddle lock icon is locked and I can not change ...
I have had an intermittent issue where users attempt to answer a call, but the device(spa504g) freezes and the lcd gets stuck "Answering". The phone becomes unresponsive to any button presses; even after considerable patience. The call is eventu...
I'm using 2 spa508g phones, in sip profile enabled unregistered make and receive calls. I make a call to FreeSWITCH, which then bridges call to another phone (sip messages are going through freeswitch, rtp should go between phones directly). Inbound ...
Our uc540 has recently developed a fault where other phones in the group keep ringing after a call (via sip) is answered. This wasn't a huge problem as if someone answered one of the still ringing phones, they just got a dial tone, however, after a r...
Hey guys, is it possible by pressing the voicemail-button on cp7975 to go to a specific voicemail instead getting asked for ID and password? Thanks for help.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: