09-30-2013 12:08 AM - edited 03-21-2019 10:08 AM
Hi
We have recently installed a SPA232D and integrated with our CUCM 8.5 as a 3rd party SIP devices which works fine.
However approx every 3 days the device unregisters from CUCM and only way to bring it back up is a reboot.
When it is deregistered we can still ping the device but cannot browse to web interface.
Anyone had a similiar issue I suspect a firmware issue.
Thanks in advance.
02-27-2014 12:36 AM
Issue was resolved by updating to latest firmware,
11-29-2014 02:48 PM
I am trying to get one of these units registered to CUCM. Can you take a couple of screen shots of the SPA232D configuration for me? I am still seeing the device as "rejected" in CUCM and when looking at the CUCM traces it appears that the SPA232D is not responding to the authentication challenge sent from CUCM.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide