SPA3102 incoming call issue

[leanfar70]

Hi,

I purchased two SPA3102 and I did a simply setup for work in a LAN.

For outgoing calls they work fine but they don't work when I receive an incoming call.

Could some guy help me?

Thanks,

Leandro.

[Carlo Poggiarelli]

Hi Leandro.

Where your SPA is registered to? (CUCM,CME or direct to TSP)

Please let me know

Regards

Carlo

[leanfar70]

Hi Carlo,

The SPA is not connected to server. I want that the SPA connecting directly to another SPA inside of the LAN. The calls will not go through the internet.

Thanks for your attentions.

Leandro.

[Carlo Poggiarelli · Accepted solution]

Ok Leandro.

In your first SPA, where the Line is connected to, verify that you have mapped the right dial plan for incoming calls.

On PSTN PAGE:

on Dialplan1 leave unchanged

on Dialplan2 configure : S0<:XX@ipaddress> where XX is the extension configured on SPA where you want to receive incoming calls and paddles is the ip address of that SPA.

HTH

Regards

Carlo

[leanfar70]

Thank you Carlo, this was helpful to me!

One more thing need to be changed.

On PSTN-to-Voip Gateway Setup, the option "PSTN Caller Default DP" needs to be changed to "2".

Thanks for you help!

Leandro.

[Carlo Poggiarelli]

Ops.. I've forgotten to mention it :)

+5 to you!!

Cheers

Carlo