Hi,
I've been trying to set up a dial plan to make remote working easier with the SPA500 series (SPA504G in this case). The phone is connected directly to a SIP provider, no IP PBX in between, so this needs to work on the phone itself.
What I want, is to be able to dial an internal number at the office, which all begin "19" and have the phone dial the corporate voice gateway, log in and then connect to the internal number. Thus:
USER dials 192212345
PHONE dials "08000111111" then pauses 4 seconds, sends "#", pauses 2 seconds, sends "192212345".
The nearest I can were these plans, but none of them seems to connect to the voice gateway at all:
(*xx|<19x.:08000111111 ,#19x.>|1xx|999|1xxxxx|18xx|0|00|xxxxxxxx.)
(*xx|<19xxxxxxx:08000684827 ,#19xxxxxxx>|1xx|999|1xxxxx|18xx|0|00|xxxxxxxx.) -- an attempt to eliminate the wildcard "x."; most internals are "19" + 7 digits.
(*xx|<19:08000111111 ,#19>|1xx|999|1xxxxx|18xx|0|00|xxxxxxxx.)
Has anyone succesfully done anything like this that they could share? Cisco team have any wisdom about other ways to structure this?
Thanks!
Jeff
