cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6222
Views
5
Helpful
2
Replies

SPA504G phone does not upgrade

MercatorIneo
Level 1
Level 1

Hello,

I try to upgrade the firmware of SPA504G phones. They are currently in version 7.5.2. I've download spa50x-30x-7-5-7s.bin and spa50x-30x-7-5-7s.exe. This is an unlocked version of the phone as the admin password is empty?

1) Run spa50x-30x-7-5-7s.exe (no firewall, no UAC) : the process runs well but at the end of the last progress bar :  upgrade failed : firmware upload incomplete

2) http://192.168.4.104/admin/upgrade?tftp://192.168.2.150/spa50x-30x-7-5-7s.bin  : phone enter in upgrade mode, reboots but is still in 7.5.2

3) http://192.168.4.104/admin/upgrade?http://x.x.x.x/spa50x-30x-7-5-7s.bin : phone enter un upgrade mode, does not reboot and remains in 7.5.2

Any hope to upgrade these phones ?

Thanks in advance for help.

Best regards,

Guy

 

 

1 Accepted Solution

Accepted Solutions

Dan Lukes
VIP Alumni
VIP Alumni

According Release Notes, no pre-7.5.2b firmware can be upgraded to a post-7.5.2b firmware directly. You need to upgrade to 7.5.2b first, then you can upgrade to newest firmware.

Note that this question belong to Voice Systems so I asked moderators team to move it here.

 

View solution in original post

2 Replies 2

Dan Lukes
VIP Alumni
VIP Alumni

According Release Notes, no pre-7.5.2b firmware can be upgraded to a post-7.5.2b firmware directly. You need to upgrade to 7.5.2b first, then you can upgrade to newest firmware.

Note that this question belong to Voice Systems so I asked moderators team to move it here.

 

Many thanks for this answer. It solves my problem.

Sorry for the wrong category.

Regards,

Guy