Voice Systems and Accessories - Small Business

Cisco 881 Router config:...ip dhcp excluded-address 10.1.0.129 10.1.0.130!ip dhcp pool PHONES   network 10.1.0.128 255.255.255.192   domain-name blabla.com   dns-server 10.0.2.11 10.0.2.24    default-router 10.1.0.129    option 42 ip 10.0.2.29 10.0.2...

Dear,phoneA : spa500+spa504phoneB : spa504Pbx : draytek 3510Scenario 1 :PhoneB boot first and registerPhoneA boot second and register=> blf is okScenario 2 : issuePhoneA boot first and registerblf = blink orangePhoneB boot second and register=> blf a...

Every client has a unique request/comment.  My current client thinks the uc560 works too well.  It's 8.6.2   When the client transfers a call and the caller is dumped to the new receipient, the client thinks it's "too clean", "too perfect".  Is there...

Hello,Are Cisco still working on a softphone to work with the UC320W, and the options to configure a phone like the SPA525G phone to work externally, or have both these enhancements been completely dropped?  They used to appear on the roadmap for the...

Dear Cisco support, Appriciate you to share any plans for Regional dial plans\settings update. I can't find several countries for my organization like Ghana, Africa. I found lotta messages around the issue but NO solution and most of you just referri...

Hi Team,Please advice what is the part number to add extra Jabber licenses on a BE6K 25 user bundleRegards,Moin

Hello, I have two problems with my UC560.First when I install Cisco IP Communicator we have one way communication. I heard the voice of my correspendent but he don't hear me.Second, we have two vlandata vlan: 192.168.1.0 which is used windows server ...

We have a UC520 but it is esentially maxed out with the 8 port switch as well as an additional 8 port switch.  I would like to upgrade to a 24 port switch at a minimum.  I was looking at the 2960S-24PD-L for about $1300 at Newegg.  How difficult will...

I would like to use a SPA8800 to make an analog line available to a VoIP phone (because at the location of the phone only LAN is available and no phone line). This is, when the line rings, the VoIP phone should ring. It would be nice to have if the V...

Cannot see USB call recording option on SPA525G connected to UC560.  Phone is configured to use SCCP (not SIP).  Firmware version downloaded to phone is 7.5.2c.  Software pack 8.6.2 installed on UC560.Can you please advise if USB Call Recording fucti...

Hellocan i configure the 303 for home use? with only a isp cablemodem?thanksEva                  

Hi All,I have connected the IP phone 7962 in UC540. As i had issues with the IP phone, I have done the factory reset.After the factory reset the phone never came back up. It displays that upgrading firmware and the process never ends. Would anyone su...

Hi,We have a customer, at a remote site with SPA504G phones, they have a problem with the phones rebooting once in a while, typically once an hour.In the reboot history on the phones the reason is "Backup IP".I cant find any reference to this in the ...

If any Cisco SMB management folks watch and read these forums, please for the love of god read this and help me understand as a partner how and why we would continue to sell Cisco SMB gear.  This is why Cisco will never be successful in the SMB space...