05-02-2011 01:39 PM - edited 03-21-2019 04:02 AM
I am having an issue pairing some Plantronic Voyager Pro headsets with a couple phones. These headset had previously been paired with the phones. Due to some configuration changes to the phones both were factory reset. Now each phone is unable to pair to the headset it had been paired to before the reset. When I attempt to pair them, using the phones interface, I get a "Pairing Failed" message on the screen. If I attempt to pair them using the web GUI it doesn't pair but gives no error message.
If I take Phone 1's headset and try pairing it to Phone 2 it works.
If I try pairing Phone 1's headset with any other phone in the company it works.
If I try pairing Phone 1 with it's headset it fails.
It goes the same for the headset for Phone 2.
I have tried firmware 7.4.6, 7.4.6(BT2), and 7.4.8 but I get the same result with all firwmare versions.
05-03-2011 05:07 AM
Dear Eric,
My assumption is that the headsets might still be in a logically paired state that's why it wouldn't allow the new pairing with the same phone. Is there a possibility to reset (or unpair) the headstest?
Best regards,
Zsolt Benko
05-03-2011 07:57 AM
Hi Eric,
In addition to my colleague's suggestion, please confirm that the phone's Bluetooth firmware is at 0.00.34 by looking at:
Info tab > System Information > Bluetooth Firmware Version: 0.00.34
I've experienced issues where Bluetooth gets confused and found the easiest is a fresh start using the Web-User Interface [Web-UI]:
Regards,
Patrick
----------
One reference document to locate SPA phone resources
05-03-2011 09:49 AM
I am trying to find a way to reset the headsets though I haven't found any data. I have a feeling it has something to do with the pairing cache on the headsets.
All phones are running the BT firmware 0.00.34. There are no profiles on the phone. I have already tried using the web GUI (as I mentioned in my initial post) to no avail.
I have an email into Plantronics since it may be an issue with their device.
05-05-2011 04:04 AM
Hi Eric,
Thanks for your feedback, your logic seems to be right especially that I have performed several factory resets on my SPA525G2 phones after which I was always able to pair back my mobile phone / headset (not Plantronics) using BlueTooth.
We'd highly appreciate if you could share your findings after Plantronics replied.
Thanks and regards,
Zsolt
05-03-2013 12:11 PM
Bump
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide