09-19-2012 05:30 AM - edited 03-21-2019 06:19 AM
Hello,
We have three offices within a city. And we will have one UC540 per site. The question is can I configure UC540 in the way that users from one office will be able to call users from the second/third office via VPN and vice versa. But each office location will call landlines via onboard FXOs.
Thanks a lot!
Solved! Go to Solution.
09-30-2012 01:42 PM
Hi Safar,
Thank you for the good rating.
Please check the following document ( it is old but it is still the same):
https://supportforums.cisco.com/docs/DOC-9775
Also CCA 3.2.1 admin guide pages 467 to 495.
As it is already written about I am sending you the links. If you have more specific questions I will be happy to answer.
HTH,
Alex
09-19-2012 07:23 AM
Hello Safar,
You may use CCA multisite manager to accomplish this. You need to have only the data vlan with different subnets.
Please tell if you will need further information.
HTH,
Alexander Maroukian
*Please rate helpful posts
09-22-2012 12:36 AM
Hi Alex,
thanks a lot for the info, however I still don't have a clear understanding of how it will work. Could you please reveal the topic further?
BR,
Safar.
09-30-2012 01:42 PM
Hi Safar,
Thank you for the good rating.
Please check the following document ( it is old but it is still the same):
https://supportforums.cisco.com/docs/DOC-9775
Also CCA 3.2.1 admin guide pages 467 to 495.
As it is already written about I am sending you the links. If you have more specific questions I will be happy to answer.
HTH,
Alex
10-02-2012 11:57 PM
Hi Alex,
thanks a lot! That the info I needed.
BR,
Safar.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide