Dialing timeout/delay when keying digits

[DataPathInc]

Is there a way to change the delay before the digits dissappear on an SPA525g.  For instance if I start to dial a number so I dial 91510 and then get interuptted for a second the number disappears and I have to dial it from the beginning.  It looks like it gives about 10 seconds to complete input of the number.  We would like to up the timeout if possible.

[Brandon Buffin]

Yes, you can change the interdigit timeout using the following CLI command:

router(config)#telephony-service

router(config-telephony)#timeouts interdigit 20

This would increase the interdigit timeout to 20 seconds (default is 10).

Hope this helps.

Brandon

[jeffrey]

I have changed both the short and long Interdigit Timeouts to 30 seconds each and it still times out in 10 seconds.