09-30-2017 12:15 PM - edited 03-12-2019 04:35 AM
I've been messing with an EtherSwitch module and I can't seem to get it to function the way I want. The router will connect with the ONT and I have connectivity. I can ping the Vlan on the switch from the router....but no traffic, no ip's being pushed. Here are the configs, please take a look and explain where I messed up.
Router#sh run
Building configuration...
Current configuration : 1601 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
dot11 syslog
!
!
ip cef
no ip dhcp use vrf connected
!
ip dhcp pool Network
network 192.172.201.0 255.255.255.224
default-router 10.0.0.1 255.255.255.0
dns-server 8.8.8.8 8.8.4.4
domain-name Herman
!
!
!
multilink bundle-name authenticated
!
!
voice-card 0
no dspfarm
!
archive
log config
hidekeys
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/0.201
encapsulation dot1Q 201
pppoe enable
pppoe-client dial-pool-number 1
!
interface GigabitEthernet0/1
ip address pool Network
duplex auto
speed auto
!
interface GigabitEthernet1/0
ip address 10.0.0.1 255.255.255.0
!
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
ppp chap hostname xxxxx
ppp chap password 0 xxxxx
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.0.50.0 255.255.255.0 10.0.0.2
!
!
ip http server
no ip http secure-server
ip nat inside source list 10 interface Dialer1 overload
!
control-plane
!
line con 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
login
!
scheduler allocate 20000 1000
!
end
Router#
Switch#sh run
Building configuration...
Current configuration : 2758 bytes
!
! Last configuration change at 19:03:07 UTC Thu Apr 20 1905
! NVRAM config last updated at 18:48:54 UTC Thu Apr 20 1905
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Switch
!
!
no aaa new-model
switch 1 provision NME-X-23ES-1G-P
ip subnet-zero
ip routing
!
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
interface FastEthernet1/0/2
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/3
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/4
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/5
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/6
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/7
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/8
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/9
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/10
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/11
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/12
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/13
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/14
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/15
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/16
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/17
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/18
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/19
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/20
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/21
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/22
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/23
switchport access vlan 50
switchport mode access
!
interface FastEthernet1/0/24
switchport access vlan 50
switchport mode access
!
interface GigabitEthernet1/0/1
switchport access vlan 50
switchport mode access
!
interface GigabitEthernet1/0/2
no switchport
ip address 10.0.0.2 255.255.255.0
!
interface Vlan1
no ip address
!
interface Vlan50
ip address 10.0.50.1 255.255.255.0
ip helper-address 192.172.201.0
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.0.0.1
ip http server
!
!
control-plane
!
!
line con 0
line vty 5 15
!
!
end
Switch#
09-30-2017 12:39 PM
Normally you would poing the IP helpher to an actual DHCP server, not "ip helper-address 192.172.201.0".
Do you have a DHCP serving up IPs for 10.0.50.0/24 ? If so, point the helper at that. Otherwise you can configure the router to do DHCP for this VLAN.
09-30-2017 06:47 PM
09-30-2017 07:20 PM
Get rid of the ip helper-address 10.0.50.0" line on vlan50 and it should work.
09-30-2017 07:56 PM
09-30-2017 07:56 PM
09-30-2017 08:36 PM
09-30-2017 08:41 PM
09-30-2017 09:46 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide