04-14-2008 06:38 AM
Hello all. We need to setup a replacement remote access server. We have a isdn30 link and i'm looking at the AS5350XM to replace it. I'm a little confused to exactly what modules i need to impliment this. At the moment my shopping list is
AS5350XM AS5350XM Starter Kit (inc Chassis, MB, Def Mem) 1
AS535-DFC-2CE1 AS5350 Dual E1/PRI DFC card
is this all i need in order to get the AS5350XM to interface wit hthe ISDN30 and to receive dialup requests?
thank you in advance
Dean.
04-14-2008 09:17 PM
Dean, if I understand correctly this Access server is for ISDN calls ONLY and not for digital modem calls - correct? Also you have a E1 connection and not T1?
If the purpose is only for ISDN calls then we are ok with the above parts.
More info on ordering:
http://www.cisco.com/en/US/prod/collateral/iad/ps501/ps6268/prod_brochure0900aecd802f8b88.html
Thanks, Mak
04-16-2008 05:50 AM
Hello and ty for the reply.
the circuit is an E1 (isdn30 pri) as we are in the uk and it will be used for remote dialin. I will use a radius server for authentication of the remote users.
04-16-2008 06:52 PM
In that case above cards will work. RADIUS sample config for dialin users:
http://www.cisco.com/en/US/tech/tk59/technologies_configuration_example09186a00800fa54a.shtml
http://www.cisco.com/en/US/tech/tk583/tk547/tsd_technology_support_sub-protocol_home.html
Thanks, Mak
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide