Hello,My problem is that I can connect to my office LAN via VPN and I can ping my default router there , but I can not ping any of the host machines attached to the my office's LAN. I'm thinking there may be an issue with an ACL but I have not been ...
I need to allow 192.168.6.0 accross the vpn tunnel to the 172.18.1.0 network. The 192.168.5.0 crosses the tunnel fine. I do not want 192.168.7.0 to be allowed accross the tunnel. I have attached my ASA 5505 config. Any help would be deeply appreciate...
The issue we are seeing is that when users come in via our VPN (PIX 515) they cannot reach one of our servers. They are able to access everything else on our network without any issues. Locally the server is reachable but if you try to come in thro...
I have a single 3000-series concentrator. Due to various forces at work in my organization, I must authenticate some users on an RSA server, and some users on a seperate server running RADIUS. In short, I need to authenticate people in "group-A" on...
Good morning I writing you to know a URL where I will find Remote-Access VPN Configuration with CLI (Comman Line Interface)Now I'm reading this URL:http://www.cisco.com/en/US/docs/security/asa/asa71/getting_started/asa5500/quick/guide/rem_acc.htmlbut...
dear sir,i have a Cisco 6509 with FWSM configured using this group:firewall vlan-group 1 104,105,109,111-114now i want to creat a new VLAN in the switch (for example VLAN 200) and i want to add it to the mentioned group.so i think i must add this com...
I am facing probelm while establishing VPN between PIX & FortiGate.The VPN gets established & works for soemtime -- a couple of days & then teh connection suddenly drops.The VPN tunnel comes up only when the VPN tunnel is reset from the FortiGate end...
Hi there:A quick question about configuring a VPN Server on C871. Is it possible to set up a VPN using Dynamic IPs? The Box do get a new IP from the ISP every 24 hours. Is a VPN possible under these circumstances? Is DYNDNS helpful?Thank you!
Hi,I have a Cisco ASA 5520 (8.0(3)).I have remote access VPN set up for users to VPN into the network. Everything is working fine.I am using a class C address pool of 192.168.10.x /24 for authenticated users (this is a different subnet from the inter...
Any one have some informationon confgured group limitation on vpn 3020? I noticed that I could not add anymore after reaching 200. However I do not see any documentation that states that. Any input is appreciated as always.Fadi
Cisco VPN client v 5.0.01.0600 stopped working after installing Vista SP1. I uninstalled the VPN software, and cannot get it to reinstall. The process is hung up on "Installing the Deterministic Network Enhancer". The process dne2000.exe also with...
Hi,Basically we have a tunnel between two sites (obviously).We are both on a network on the inside interfaces (there's is 10.20.x.x / 255.255.0.0 and ours is 172.16.0.0)The tunnel comes up fine. If he then tries to ping me it fails. I have added th...
Why do we have Single Hop between Ipsec Peers?What is the concept behind this?Physically the data is transmitted through various routers or hop reaching the destination peerBut while tracing we can see only 1 hopWhy it so?Regards,Kesavamurthy Palani
A router is making an ipsec connection to two different routers over internet.Only a singe ip lets say 172.20.18.25 is allowed over vpnIs it possible to nat the ip to two different ips for each vpn
