04-20-2016 10:57 AM
I have tried setup asa to accept Remote access VPN traffic.
I can connect with VPN, but the VPN client can't do anything after VPN connection has been established. Client can't ping inside or outside or asa.
I can ping anything from inside ASA.
I found this: http://www.cisco.com/c/en/us/products/collateral/security/ios-easy-vpn/prod_white_paper0900aecd805f0bd6.html
but I'm new to ASA. I only have some CCNA experience, I suspect it's in the right direction?
I've attached my asa config.
Grateful for ideas...
04-20-2016 05:38 PM
Hi,
Add the following command on the ASA and then test pinging the ASA inside IP :
management-access inside
Regards,
Aditya
Please rate helpful posts and mark correct answers.
04-21-2016 03:50 AM
Hi,
I can now ping 192.168.0.101 (asa inside interface) and 192.168.20.2 (Asa outside interface) from the VPN-client.
Thanks, Lars.
04-21-2016 06:59 AM
Hi,
Glad to assist.
Please mark correct answers and rate helpful posts.
Regards,
Aditya
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide