ASA 5505 on the inside

[larlid001]

I have tried setup asa to accept Remote access VPN traffic. 

I can connect with VPN, but the VPN client can't do anything after VPN connection has been established. Client can't ping inside or outside or asa.

I can ping anything from inside ASA.

I found this: http://www.cisco.com/c/en/us/products/collateral/security/ios-easy-vpn/prod_white_paper0900aecd805f0bd6.html

but I'm new to ASA. I only have some CCNA experience, I suspect it's in the right direction?

I've attached my asa config.

Grateful for ideas...

[Aditya Ganjoo]

Hi,

Add the following command on the ASA and then test pinging the ASA inside IP :

management-access inside

Regards,

Aditya

Please rate helpful posts and mark correct answers.

[larlid001]

Hi,

I can now ping 192.168.0.101 (asa inside interface) and 192.168.20.2 (Asa outside interface) from the VPN-client.

Thanks, Lars.

[Aditya Ganjoo]

Hi,

Glad to assist.

Please mark correct answers and rate helpful posts.

Regards,

Aditya