VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Hello:We have a VPN setup and here's the configuration on the Cisco ASA 5505:hostname ciscoasadomain-name default.domain.invalidnames!interface Vlan1 nameif dmz security-level 50 ip address 172.16.1.2 255.255.255.0!interface Vlan2 nameif outside secu...

Hi,     My company uses an ASA 5520 to authenticate VPN using the Anyconnect client. We would like to deploy a second authentication method such as Host Scan (CSD.) Our ASA is currently running on a "Plus" license. As I understand CSD will only work ...

Attached is the visio of how things will work out physically. My goal is to have all traffic destined for either the 10.0.0.0/24 network or going the other way to the 10.1.0.0/24 network be sent over the VPN tunnel.I'm wondering if traffic coming fro...

Hi,I configured a remote-access vpn on an ASA 5510 version 8.3. This is the configuration............tunnel-group prova4 type remote-accesstunnel-group prova4 general-attributes address-pool vpnpool1 default-group-policy test_vpnpool1_policytunnel-gr...

We are using ASA5520 as our VPN concentrator and has configured IPSec authentication using digital certificates with Microsoft CA for the remote access VPN. The AAA server used for remote user authentication is Windows Active Directory. Screenshot of...

Hi,We have  remote access VPN configured in our Data Centre on Cisco ASA 5520 ver 7.0. for users to be able to connect data centre network.I have observed a  strange thing -If users connect from thier home using WiFi Broadband Internet connection, VP...

query1000 by Level 1
  • 580 Views
  • 3 replies
  • 0 Helpful votes

My first time using this service ... please be gentle.I recently setup a vpn anyconnect for a specific application.  My question,  if  I use the command   " show conn"VPN01# sh conn | i 172.18.7.36UDP Outside 172.18.7.36:1123 DMZ_ADM 10.7.16.57:81, i...

Resolved! Unable to SSH

I am unable to SSH to the inside interface of the ASA when I login to Cisco VPN client.  When I tried to SSH, nothing is displayed on the screen.  There was no error message.  Do you have any suggestions?ip local pool vpnpool 10.10.0.1-10.10.7.240 ma...

hi there,I'm trying to setup a VPN between a PIX and a Draytek. I've managed to get the tunnels to form but no traffic seems to be going down them. I'm guessing there's an error with NAT or an access list??I notice in the PIX under IPSEC rules it say...

I got the error message when I tried to assign an IP address to a user account (vpn-framed-ip-address 10.10.7.240 255.255.255.255).  The error message was "Error:  invalid IP address/net mask combination" .  Can you see anything wrong with the IP add...