VPN

Hi AllHas anyone managed to setup GETVPN on a CE router with VRF Lite?I using 2821's (12(24)T4) in a test lab to test the functionality of GETVPN before I deploy on a production network.   The GETVPN configurations works fine if the routing is in the...

Hello guys,I installed PKI server on cisco router, here is configs,lab1#show clock14:34:14.426 EET Tue Sep 21 2010!crypto pki server LAB database level complete no database archive issuer-name cn=NOC1 grant auto lifetime crl 12 lifetime certificate 1...

We have an issue on our network that when we transfer files from site to site using windows the transfer drops and we get the error message "network not available". It doesn't happen all the time but 9 times out of ten it does! Some tunnels work bett...

VPN 3005 Concentrator - I activated the "User" account with limited access, since applying the change and logging back into the concentrator the "admin" a/c also has limited access! If I login via the command line with the "admin" a/c I get the follo...

Hello everyone...I have a cisco 831, I configured with VPN access.I do VPN with Cisco VPN Client.I have some static NAT.The question is..How can exclude VPN to do NAT.What  I want is that when I am connected via VPN, I want full access to my LAN with...

I have an issue where I have an internal video conferencing device that can be moved from conferenceroom to conference room, and each floor of the building is on a different VLAN. I can make DHCPreservations so that I know what IP the device will get...

Customer is looking to test EZVPN in lab with 5505 head end and 3 or 4 5505 remotes. They will be doing less than 10 sessions. If they roll to production, they will use a pair of 5520s for the head end. While I believe all this should work fine, they...

Hi folks,Actually I have just setup a vpn, everything is working fine except when the clients disconnect the VPN client session. What happens is that when I issue ¨show ip route¨ the static route pointing to the client is still there,  even if I issu...

I'm trying to get a VPN working on a cisco 1811. The VPN is basically used for the following senerio: A user will connect to the VPN and once inside they will connect to a computer using VNC. This set up works on computers, the problem is when they u...

What are people's experiences with setting up a 5505 as an EZVPN remote client?  I'm trying to set one up to connect to a 5510 head end but the tunnel doesn't come up.  I started with client mode and got that to work, although not reliably, and now I...

Hello,I have a question about the new Nat commande on asa 5505 v 831.How can I translate this nat commande from asa 5505 v802  in asa 5505 v831 ?Commande in asa 5505 v802 :        access-list EURODATA extended permit ip 10.19.3.0 255.255.255.0 10.20....

Hi,This question comes from our CSC Facebook Community.  http://www.facebook.com/CiscoSupportCommunityTamer Rabee i have asa 5505 want to configure it by 3 separate vpn how can i make this?

I am trying to get the SBL to work for Windows XP/Vista/7 using an ASA5510 running 8.2 (1). When I login to the WebVPN, it installs the anyconnect client and SBL components,  and copies the xml profile. When I reboot, I get nothing popping up (on an ...