VPN

Hello,I can't get past isakmp phase 1 negotiations.here is the output of debug crypto isakmp error:Feb 12 17:08:54.910: ISAKMP:(0): MM Fragmentation supportedFeb 12 17:08:54.910: ISAKMP:(0):Encryption algorithm offered does not match policy!Feb 12 17...

I am attempting to get dynamic group placement working with SDI and RADIUS authentication. Problem is, SDI can MUST be the primary authentication type, and when RADIUS is set up as the secondary authentication type, DAP appears to ignore the option 2...

Is this possible? I'm working on a project involving more than 500 remote sites coming in over ATT's MPLS cloud. The plan is to deploy dmvpn over the ATT MPLS cloud and enable MPLS over the tunnels so we can service multiple vrfs at the remote sites ...

Hi,we are looking at a hub-spoke ipsec implementation were the spokes will be issued with dynamic ips. The hub and spokes will be IOS routers. If we use a wildcard pre-shared key can the spoke routers be configured as xauth clients? What other option...

Dear experts,I prepare Cisco1841 as CE router of MPLS and need to set up US.Robotics 56k modem to connect to Cisco 1841.This modem enable for me to login via PSTN when MPLS is down.http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note0918...

We have a custom application that connects through reverse telnet to a Cisco 3640 that has 2 NM-24DM modules and 2 PRIs connected to it. Currently all outgoing calls are getting load balanced over the two PRIs. I need to change that so that all calls...

Hi All,We have an ASA 5540 running SSL VPN.  We are looking for a way to prevent users who have personal laptops from using their logon credentials to put their personal laptops on our network.  Most users have a company issued laptop but we had a pr...

Hello all,I was wondering if the AnyConnect software use the same .pcf file as the standard VPN client software?  I have no expereince with the AnyConnect software.Thanks in advance.All replies rated.

I'm looking to centralize all of the VPN account (AnyConnect / SSLVPN) via our Active Directory.  I would like to set up AD via IAS groups, based on security levels, and map those to the Cisco ASA group policy.  Furthermore, I would like to assign an...

Hi folks, looking for your help. we are using the Cisco VPN client 5.005. When users connect from home to our System i (as400), sessions drop, even when users are actively using their system i sessions. In doing some research, and contacting IBM, it ...

Dear sir,  In ASA 8.x or later, how to set up the bookmark or url list use the command line. I know how to build it use the ASDM, but can not find the right command in CLI.

Everything is configured as written in the config guides. I have also tried configuring AnyConnect through ASDM, but no success. I had a previously working config for ASA 8.0 and older AnyConnect version, but that is not working either.I get the foll...

I have a VPN tunnel from an ASA 5500 running 8.0.4 to a Nortel Contivity device.  Periodically the tunnel will just stop passing traffic (do not see encap or decap numbers increasing) but the tunnel will still be up.  After a clear crypto ipsec on th...