08-27-2001 06:48 PM - edited 02-21-2020 11:24 AM
Hi,
I can VPN and access remote network by using the connection from ISP dialup or ADSL. But can not access any remote host from VPN tunnel being established from my company network. Any Clue ? Please advise. I'm using Cisco VPN Client 3.03a and 3.1 with VPN 3000 concentrator.
Cheers,
Tony Chua
08-31-2001 11:14 AM
You have a hub and spoke configuration? You are a spoke tunnel. You can access all resources at the hub but not another spoke? If thats a correct understanding, then you need to reconfigure the concentrator to allow you access. Add the network under the network lists page. Details: http://www.cisco.com/univercd/cc/td/doc/product/vpn/vpn3000/vpn3kco/vcoug/usr_3_0/polmgt.htm
08-31-2001 11:47 AM
Access is only allowed in one direction. From Clent to Concentrator, not vice versa. If the tunnel is already initiated from client side to head end, you may be able to access the host but I know for sure the the tunnel can ONLY be initiated from client side.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide