11-27-2001 08:44 AM - edited 02-21-2020 11:30 AM
Was wondering if anyone has come across the same issue as Cisco Bug CSCdm38080 -aaa commands present, but tacacs commands are not present. This is when configuring TACACS+ on 2900XL ver 11.2(8)SA5
The Bug Status says closed- without any resolution?
Does that mean 2900XL does not support TACACS+ ??
11-29-2001 07:37 AM
Hello there!
I have a number of 2924XL-EN switches running version 12.0(5)XW. TACACS+ does work on these switches. I haven't tried it with 11.2(8)SA5.
Sample config from one of my switches...
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication login tacacs+ local
aaa authorization exec default group tacacs+ local
aaa accounting exec default start-stop group tacacs+
tacacs-server host ***.***.***.***
tacacs-server key ****************
Hope this helps!
01-14-2002 08:04 AM
I too had the same problem. Does this mean the 2924XL switches simply need to be upgrades to 12.0(5)to allow TACACS+ to be configured?
Thanks, Brian
01-14-2002 09:22 AM
Yes, Its a confirmed bug for that version. These will need to be upgraded to at least 11.2(8)SA6 or higher to support TACACS+
01-16-2002 08:05 AM
Can anyone point me in the direction of supporting documentation to TACACS+ working with 11.2(8) or higher? Thanks so much!
01-16-2002 08:48 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide